RPP Hobby Blog

Navigation Menu

RPP Hobby’s Scale Garage – Part 2

RPP Hobby’s Scale Garage – Part 2

Posted by on Sep 4, 2018 in Tech | 0 comments

It’s time for the second installment of the RPP Hobby scale garage build! In this article we are going to show you more details we have in mind for the garage and/or workshop. We want this project to have a ton of detail so we have been running different scenarios through our minds as to what we want to have in the shop, as well as where it will sit....

Read More

Axialfest 2018 Video and Photos

Axialfest 2018 Video and Photos

Posted by on Aug 3, 2018 in Events | 2 comments

Another Axialfest has come and gone, and like year’s past it was a memorable one. We are not sure of the actual attendance numbers, but it had to be record breaking again this year. The Cisco Grove campground was literally crawling with activity! Everywhere you looked there were people driving scale RC trucks through the campgrounds headed to the...

Read More

RPP Hobby’s Scale Garage – Part 1

RPP Hobby’s Scale Garage – Part 1

Posted by on Jun 22, 2018 in Tech | 2 comments

It is time to build RPP Hobby our very own 1/10th scale garage! This is something we have wanted to do for a long time. We’ve had different ideas we would incorporate into our vision of a clean, creative scale workshop floating around in our heads for a while now. We recently jotted down a few ideas on paper to get them documented and it went down...

Read More

Castle Creations CC BEC 2.0 Install

Castle Creations CC BEC 2.0 Install

Posted by on Jul 1, 2017 in Tech | 0 comments

Does your ESC stall out in hard binds with your high torque steering servo? Wish you had a little more power in your steering set-up overall? Castle Creations has just the part you need to solve your steering woes. One of the most common problem when running a high torque steering servo is the draw on the internal BEC of the ESC in hard binds, especially...

Read More

Axial SCX10 II Build – Part 7

Axial SCX10 II Build – Part 7

Posted by on May 10, 2017 in Tech | 1 comment

Welcome to the final installment of our Axial SCX10 II kit build. Now that we have a functioning scale R/C vehicle, all we need is some paint to bring that classic Jeep Cherokee body to life. In this article we will cover trimming, painting, and detailing the Lexan body. We planned to keep the paint fairly simple since we want it to look like a Jeep you...

Read More