RPP Hobby Blog

Navigation Menu

Axialfest 2018 Video and Photos

Axialfest 2018 Video and Photos

Posted by on Aug 3, 2018 in Events | 0 comments

Another Axialfest has come and gone, and like year’s past it was a memorable one. We are not sure of the actual attendance numbers, but it had to be record breaking again this year. The Cisco Grove campground was literally crawling with activity! Everywhere you looked there were people driving scale RC trucks through the campgrounds headed to the...

Read More

RPP Hobby’s Scale Garage – Part 1

RPP Hobby’s Scale Garage – Part 1

Posted by on Jun 22, 2018 in Tech | 2 comments

It is time to build RPP Hobby our very own 1/10th scale garage! This is something we have wanted to do for a long time. We’ve had different ideas we would incorporate into our vision of a clean, creative scale workshop floating around in our heads for a while now. We recently jotted down a few ideas on paper to get them documented and it went down...

Read More

Axial SCX10 II Build – Part 7

Axial SCX10 II Build – Part 7

Posted by on May 10, 2017 in Tech | 1 comment

Welcome to the final installment of our Axial SCX10 II kit build. Now that we have a functioning scale R/C vehicle, all we need is some paint to bring that classic Jeep Cherokee body to life. In this article we will cover trimming, painting, and detailing the Lexan body. We planned to keep the paint fairly simple since we want it to look like a Jeep you...

Read More

Axial SCX10 II Build – Part 6

Axial SCX10 II Build – Part 6

Posted by on Mar 23, 2017 in Tech | 0 comments

It is officially time for part 6 of our Axial SCX10 II Kit build. Now that we pretty much have a rolling chassis it is time to install the electronic speed control, aka ESC. We will also plug in the receiver to finish out the electronics install. After that, we will be making an upgrade in the wheel and tire department to give our rig a little different...

Read More

Axial SCX10 II Build – Part 5

Axial SCX10 II Build – Part 5

Posted by on Mar 16, 2017 in Tech | 1 comment

Welcome to part 5 of our SCX10 II kit build! It has been a while since we have done a blog entry on the SCX10 II because of the two other builds we have going on. Now that we are back on this project here is where we are at. The axles, transmission and driveshafts were all completed in the first few blog entries. In this installment of our build we will...

Read More