RPP Hobby Blog

Navigation Menu

Axial SCX10 II Build – Part 7

Axial SCX10 II Build – Part 7

Posted by on May 10, 2017 in Tech | 1 comment

Welcome to the final installment of our Axial SCX10 II kit build. Now that we have a functioning scale R/C vehicle, all we need is some paint to bring that classic Jeep Cherokee body to life. In this article we will cover trimming, painting, and detailing the Lexan body. We planned to keep the paint fairly simple since we want it to look like a Jeep you...

Read More

Tamiya Grand Hauler Kit Build – Part 3

Tamiya Grand Hauler Kit Build – Part 3

Posted by on Apr 27, 2017 in Tech | 0 comments

It’s time for part 3 of our Tamiya Grand Hauler kit build. For the first two installments of this build, we covered chassis and axle assembly. In this portion of the build, we will cover installing the rear axles and dig into the amazing three speed transmission that comes with this kit. It doesn’t get much cooler than being able to shift gears...

Read More

Vaterra Ascender K5 Blazer Kit Build – Part 5

Vaterra Ascender K5 Blazer Kit Build – Part 5

Posted by on Apr 6, 2017 in Tech | 0 comments

We have been making steady progress with our Vaterra Ascender K-5 Blazer kit build over the past couple weeks. The transmission and axles are now complete. The chassis is built and the electronics have been installed. Now, we are ready to build the shocks, install the battery tray and assemble the suspension links. We are also going to add our first...

Read More

Vaterra Ascender K5 Blazer Kit Build – Part 4

Vaterra Ascender K5 Blazer Kit Build – Part 4

Posted by on Apr 4, 2017 in Tech | 0 comments

Welcome to part 4 of our Vaterra Ascender kit build. Now that the transmission, axles and chassis are assembled, it is time to install the electronics in our K-5 Blazer. We gave everyone a preview of the electronics we hand picked for the scale build in part 1 of this build. Now it is time to pull everything out of the package and breathe some life into...

Read More

Vaterra Ascender K5 Blazer Kit Build – Part 3

Vaterra Ascender K5 Blazer Kit Build – Part 3

Posted by on Mar 30, 2017 in Tech | 2 comments

It is time for part 3 of the RPP Hobby Ascender K-5 Blazer kit build. For the first two blog entries on this particular build we covered assembling the transmission and axles. For part 3 we will document the complete chassis assembly and point out a few things to watch out for during the chassis assembly process. Who is ready to get their tools dirty?...

Read More